Search:

do you have an example as to what you are looking for?

depends if you are running the carbs progressive or not. also if you plan on running in colder temps

welcome fella

if it has 4 coil springs it should be very close.

hey fellas, just picked up a visor. came off of a 1951 4 door roadmaster. I have a 52 special. looks like the profile is a little off, no big deal I'll make it work. it has all the hardware and...

use coolant of any type. ethylene glycol, propylene glycol, extended life, sca,non sca...............it has rust inhibiters and will raise your boiling point under pressure.

make sure it is not just adjustment. may be able to clean up contacts or find a used one.

cool. would just need simple adaptor to turn the carbs.

cool. post pix

I am running 10w-30 or 20w-50 valvoline VR-1 because of the high zinc. I have info from KB on the full flow filtering system. I plan on doing this sometime.

thanks Jens. OEM oil filter running baldwin element. I have just under 10psi when HOT at idle and 40psi down the road. I am not worried about that. I pulled the rocker cover and oil still flows...

yes!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

keep in mind the 320 is longer and I believe the mounts are different. the crank might also be different if 3 speed vs dflow.

yup, you need them.glad you have them coming.

on my 52 special I stole the shoes and drums from my 50 super parts car. If I remember correct, the 52 special had 1-3/4" shoes and the 50 Super had 2" shoes. on my car this seems to have made a...

got some striping done on the engine a while back. logged ? 4000 miles? running great still.

welcome aboard.

welcome. there is some good info/people here. check out the REFERENCE tab above. also search old threads.

on the west coast. go to Bobs Automobilia

converted my stock wiring to 12V. installed a gm 10si and I have a pertronix 12v dizzy. nice to be able to charge cell phones/ GPS/ have a radio.... and find parts. all depend on how you want to...

sounds cool to me. my car club has one also with plans of building a belly tanker to race at the flats

I got cam bearings from EGGE. $50. mains from EGGE $127, piston rings from EGGE. rod bearings from Cars Inc. lube holes did not match up well, so I just used a burr bit to egg shape. timing...

rebuilt my 263 last year. installed new cam bearings. they did have to be line bored. very tight. even after I did not like how much drag the cam had. I should have had machine shop take a...

the car is at my farm and has been sitting in the barm lot for a while. I live 20 miles away. I might get there this weekend to look. this style bumper? this pic is from a while back.

I have a 80 4 door malibu parts car. just keeping it for the frame/ drivetrain. 61723 zip