:hurray:I need to know steering column length.
Type: Posts; User: bob tie
:hurray:I need to know steering column length.
I'm going with a th200 and an adapter from D&D fab and mach. Lokar shifter on the floor.Trans is a chevy rebuilt. I am waiting for the tranny now.
I am looking to find an auto trans to fit my 63 skylark 215V8. The trans looks similar to a power glide in size. I don't want to do alterations on the floor. I will need a good cooler ,and of course...
I just installed an Edelbrock 1403 on my 63 skylark. On startup, the motor raced to 3000rpm, now I have trouble with the linkage to the trans and a broken gas pedal. Monday I will call tech support...
I am looking for a trans swap for my 1963 skylark. I'll go stick or auto,any help would be welcome.thanks
Try Kanter auto parts,or Buick classic parts.
My 63 skylark has 13" wheels . The centers are cracked,loose or missing. I used two on my boat trailer for easy greasing.
I would like to know if I'ii need a spring compressor when I replace the front and rear springs? Also,were can I buy spring insulators for less than $40 a set ? My car is a 1963 Skylark. Thanks
I'm trying to remove the rear flex hose on my 63 Skylark,as usual wrenches are slipping.Would heat be safe to use? Are there any real good tubing wrenches.
:clonk:1963 Buick Skylark, I am trying to convert my single mc to a duel mc. Can anyone tell me what would work. I would like a stock appearance if possible.If you have a small Buick you know how...
I have a tru torque hose from Knetchs auto in Oregon,with h37565. My other hoses came from Kanter Auto in NJ .I'm about to replace thesenext week. Oh the hose for the rear is 22 3/8.
I'm in need of a duel master cylinder for a 1963 skylark.The replacement I have is to big to fit.I need one with the ports on the right side. This is not power steering. Help!
I had to find a new actuating rod, and it's about 11"long and ajustable. I always like a second opinion.Thanks
I'm trying to install a dual master cylinder in my 63 Skylark, and am having a problem with clearance at the firewall. Would it be okay to lengthen the studs and add a spacer to move the MC forward...
I have a corvette style master cylinder to install.It's a tight fit so far. looks like Iwill have to cut the lip of the frame and dent the inter fender well. I wish I could see a picture of this swap...
The waterpump pulley on my 215 measures 2in. Ido not have power steering. Hope this helps.
I would like to find out what size air lift bags I'd need for a 1963 Skylark. I haven't been able to find any from Air Lift. I tried writing to the company, but never got a response.