Junk yards are your best bet or even a donor car. Ive look high and low for body part and have not found any. Im working on my 64 lesabre's body too im making all my patch panels. Its a PITA but I...
Type: Posts; User: soberarmy
Junk yards are your best bet or even a donor car. Ive look high and low for body part and have not found any. Im working on my 64 lesabre's body too im making all my patch panels. Its a PITA but I...
Flapping noise could be a u-joint that gave out. Worth checking out.
I always thought some parts were interchangeable but how much will actually fit?? It would be cool if anyone that knows of parts that will fit our 64 wildcats and lesabres would post them up whether...
I have 225/75/15 on my 64 Lesabre. It looks good, fills out better.
I dont know if the 64 wildcat washer pump is the same but i found a repair kit at kragen for $14.00 it not the correct color but itll work.
The rear coils seems fine to me and i see what you mean with a little more research or help from here ill figure it out. As the drive shaft i had no problem because i swap it with the one from the...
A short time ago I replaced my engine (300cu) out of my 1964 Lesabre and replaced it with a 1964 401 Nailhead and transmission. The problem that I have is the front of the car seem really low now and...
i have a 300 block and aluminum heads. the heads needs to be rebuilt but the block is still good. it ran good before i had to pull it. ive since replaced it with a 401. the 300 was out of a 64'...
rcfryer from what year did you replace your master cylinder and booster. I been checking and i think the 67 booster and master would fit.
Ill do. Thanks for the info.
Thanks, it took a while for some one repond to this post. I guess its doable while the rear drums are of ill replace the wheel cylinders and shoes. Thanks again
Here in Chula Vista. 1964 lesabre with a 401 nailhead. I know there are alot more of us here in San diego
It would be awesome to have this setup on my nailhead. Some one out there must have a extra block they can donate for the cause.:thumbsup:
I dont know alot but ill try to help. Have you checked to see if your getting fuel to the carb.
no compressor bracket, to tell you the truth i pulled everything out of the donor car and set it aside. as to how well everything works i dont know because when i got the car i did not have the...
Thanks for the heads up. I'll try to help someone out but if he has history....Well you know. If anyone is in Southern Ca. San Diego area come and check it out
I have a original ac unit out of a 64 Wildcat minus the compressor. If any one is interested get at me ill let it go cheap. everything is there.
hey wildkitty how did the jb weld hold , and if it did how did you prep. the part before applying the jb weld.
how difficult is it to replace the gasket on my rear end carrier on my 64 buick lesabre? from what i read they are telling me that i have to first remove my wheels, drum and then pull my axles before...
i too have a 64 lesabre 2 door coupe and i think the polished or gun metal are really nice and they dont seem too expensive. in the reference there is a chart to figure your offset and and width. im...
Thanks i appreciate your honesty, ill try to salvage mine. Ill keep my eyes open.
Thanks ill give that a try. Is there a place to purchase a new one Just in case?
I'm looking for a heater valve for a 1964 Buick lesabre non air, im having trouble finding one all i find is one for a 65' with the vacuum nipple on top, i need the one with the cable attached to it....
i forgot to mention that both transmission are out.
as you might know by now i have two 64's a lesabre two door and a wildcat 4 door. The 4 door is a donor car. they are both on jack stands. i spun a rear tire on the wildcat and both wheels spun in...