Just a follow-up, I fixed it with a spring I matched up from a hardware store, with the latch assembly on my bench, I was able to pick off the rusted spring and wind the replacement onto the post....
Type: Posts; User: 73 electra
Just a follow-up, I fixed it with a spring I matched up from a hardware store, with the latch assembly on my bench, I was able to pick off the rusted spring and wind the replacement onto the post....
My push button return spring broke on my latch causing the door to be unable to unlock. I "slimjimed" the door open & removed the latch, can this spring be replaced and is it available? Thanks
Thanks Bob , I did have 8 photos pulled down, I'll try with 2 first, then add more, Thanks again, William
I've tried twice to post a car for sale ad and after hitting submit it runs for a couple of minutes then kicks me out? What am I doing wrong? 73 electra
Will any early year , mainly a bumper without rubber and those little "bumperettes" fit on a 73 electra? thanks in advance, OLY:shield:
my 73 electra drivers door is stuck shut & locked, it will not open with the key or from the inside. can i "slim jim" it open, because i can't get the door panel off with it shut , thanks in advance...
I also recieved a e-mail from the same person/address saying they would buy my car, I wrote back cash only, I knew something was fishy when they offered to buy the car sight unseen.
hey thanks for the replies, i replaced the choke pull off right away when the problem started,cleaned all the linkage & checked for binding. I feel it's vacumn not mechanical.I'll do the leak down...
hey! My wife's 69' cadillac is giving me trouble, but only part of the time. Here's the deal, on startup sometimes the choke won't pull open that little bit after the car fires that it needs to run....
Hey, after reading my own reply I felt my story had a few "holes" in it.I said my starter selonoid was "stuck" in the engaged mode.Well I am sure the ignition switch short caused this,manly because...
SUCCESS!!! my car only starts when i want it to.my local auto parts store suggested that the selonoid could have stuck,but i had to prove it.so i did,i had the starter tested at a electrical shop &...
yeah rat,possibly,but i have to go the mechanical route first.anyway i replaced the ignition switch & it will not fire.i'm sure the starter is fried from "the incident".gonna have it tested &...
thanks to both you guys! I really apppreciate the help & i'll replace the switch & go from there,cheers.
hey i checked the connections of the ignition switch and everything is intact& no signs of arcs.by the way,i've owned this car for 12 years& it has'nt been altered in any way. any other ideas,anybody?
thanks guy! i'll check it out
o.k. here we go,73 455 ,starter was slipping once every five times for about a week,then it started one day and stuck engaged(the bendix) with the car running.shut it down,pulled & replaced(starter)...
hey thanks for the reply and no offence taken. yeah i know it's a big carb but it's the only direct bolt on spreadbore i was told of from two different sources in the seattle area.the factory carb is...
so,
after two rebuilds,i boxed up the factory quadrajet and replaced it with the 1910 850 cfm ele.choke spreadbore.great carb mid throttle,but problems on startup/cold idle.if its below 70 degrees...
hey!
I am trying to find a cadillac owners club for my old ladys 69 coupe deville half as cool as this buick site.please help,thanks.
73 electra graemlins/rolleyes.gif
hello to all!
i have installed a edelbrock 1910(850cfm ele.choke) on my stock 455.my trouble lies in the choke only when the outside temp is below 70.it will load up & die on first try,catch & run...
thanks for the links johnny boy!
73 electra
thanks for the link! 73 electra
wanted to know compression ratios for stock 455 electras 70-74 & if the heads are interchangable