Printable View
Looking for some help locating a source for quarter extension seals for my 67 GS 400. I tried all the main players but no luck. Thinking I may have to make them if I can find the right material. Still have the old ones just all dried and cracked. Any suggestions would be GREATLY APPRECIATED!
I'm building a 66 Skylark
Same problem.
If you know any one that does roofing the real heavy felt paper is real close to the original .
Grab a scrap piece an male your own.
Terry:shield:
Thanks Terry for the suggestion, never thought about 30# roofing felt (actually have some in the shop). I did find a company Metro Molded in Minnesota last night. Ordered a piece of 1/8" closed cell foam that may work. Measured the piece I took off the car and it's also 1/8" foam (I assume its original, but not sure).
Oh :jeez:
I'd be careful, I would think that foam would hold moisture !
Wont hurt your extension but it will the quarter.
Terry
Thanks, good point. I did receive the stuff I ordered and it is more like a sheet of rubber than a foam. The confusing thing is that the existing seals are of a heavy foam material that appear to have been stamped. They also look old.