well here we are in Julyand my car is almost done. I drop the s b c 350 and th 350 in my buick skylark. Thee driveshaft had to be cut 3/4 inch and the transmission cooler lines had to be replaced. After doing all this kickdown cable and my shift linkage cable seem to be broke and my Keys don't start my car anymore but I do have power inside the vehicle and my engine light comes on when I try to turn the car on so I'm thinking might be the ignition switch not sure.i have push button trigger with a positive and negative clamps were can I hook these up to jump start my engine? Which wires off the starter soleniod do I connect too or what? any help would be appreciated everybody thanks!