Trick to installing ignition switch?
Just replaced the lock cylinder our 95 Park ave and added a removable passkey bypass with old car parts. https://www.teambuick.com/forums/sho...121#post105121
It looks like it went well and it all works. However, in the process of narrowing down the problem I lowered the column and unbolted and slightly detached ( not the wires) the high beam switch and ignition switch to see if the key rack moved freely.
It turned out to be a bad lock cylinder so I bolted the two parts back on, raised the column and started tearing into the steering wheel.
But now I'm getting a no crank situation and there is also no click coming from the starter so it seems like it must be the ignition switch. Used the following page to check.
https://itstillruns.com/test-ignitio...h-5892178.html
Can anyone tell me if there's some trick to installing these switches on the key rack arm? Or maybe it's obvious to somebody how I messed this up? Thanks.