For those of you who do all the labor on your cars...
Until recently, I have been looking everywhere for a door spring for P.G.'s driver door to remain open. I've now acquired an NOS spring. I looked on the passenger door hinge to see maybe how to install it. It appears that some body work will need be done to reveal the spring's receiving end. Can anyone explain if this is accurate OR is there indeed a way that I will be able to attach the spring myself. :confused: (Remember, I'm not a mechanic). Thank you for your time & all suggestions are most welcome.
MUCH appreciation for the photo, Todd.
Quote:
Originally Posted by
TODD
Here's a page from the body manual showing the hold open spring on the bottom of the lower hinge. With the door wide open, maybe it is possible to snap the loop of the spring over the inner tab and then stretch the hook end of the spring over the outer tab? Probably takes two people.
A stout tool will be needed to extend the spring. Something like an ice pick bent into a U-shape at the end. Or a loop of heavy wire that can be cut once the spring is seated.
At least I now know the route the spring needs to travel to get from one anchor to the other. That's half the battle. :hurray: