Rochester Quadrajet No Gas
I have a 85 Buick Riviera which I just installed a Carburetor on. It seems to be working ok but having trouble getting gas up through the jets. I read up on others with this problem and said it needs to be primed with a eyedropper. Maybe I am a little dumb about this well it is only my 2nd time replacing a Carburetor. So my question is where on the carburetor is there a spot so small that you need to use an eyedropper to prime the Carburetor??
Rochester Quadrajet No Gas
In the bottom of the float bowl are plugs that will allow fuel to leak out of float bowl into the intake manifold.
When you have it overhauled have the mechanic seal those plugs with epoxy, a slow drying JB Weld with all surfaces well cleaned is reccomended, and 15 hours drying time before exposing to gas.
I just went thru this with my 85 Buick.:thumbsup:
Rochester quadrajet carburetor question?
I have a question on a rochester quadrajet carbs is it worth rebuilding or not i have a problem with mine the fuel start coming out the carb were the gas pump the carb is and it idles poorly this never happen to me before when this happen when is check my fuel filter and spray carb cleaner on the carb..