I have a 1970 skylark 350 and I just installed a ACCEL - Points Eliminator Kit. Now It wont start after hours of trouble shooting. Here is what I have tried so far:
Checked ignition power source its at 6.4V switch on and 9.6V cranking.
Double checked timing and wire placement.
Pulled all plugs and cleaned them. Checked to see if plugs had spark.
I think the coil might be faulty. I pulled the main wire from the coil that goes to the distributor cap. It didn't pop or crack from spark.
If you have any advice please can you help me??