Hi Guys, I'm purchased a 41 Buick 248 motor that was rebuilt, but never started. I would like to verify the routing for the vacuum lines, oil filter canister lines and oil pressure gauge line.
Vacuum lines: from the pump, the front vacuum line goes to the intake manifold; the rear vacuum line goes to the wiper motor.
Oil lines: from the oil filter canister, the bottom line from the canister goes to front of the cylinder head; the side line from the canister goes to the block outlet between the canister and the distributor.
Oil pressure line: originates from the block outlet immediately behind the oil filter canister and goes directly to the oil pressure gauge.
As always, help and comments are greatly appreciated.
Vacuum lines: from the pump, the front vacuum line goes to the intake manifold; the rear vacuum line goes to the wiper motor.
Oil lines: from the oil filter canister, the bottom line from the canister goes to front of the cylinder head; the side line from the canister goes to the block outlet between the canister and the distributor.
Oil pressure line: originates from the block outlet immediately behind the oil filter canister and goes directly to the oil pressure gauge.
As always, help and comments are greatly appreciated.
