1960 LeSabre 4drsd will NOT Reverse! What's wrong!!!

Electrical problem

Hello,

Anyone have an idea why the fuse breaks under "DOME" all the time? This is a some what new issue. It started happening when it rained and I thought water got to a wire. Now its been sunny in San Diego and it keeps happening. I have gone through about 5 fuses of 20A and 1 of 30A already. Where should I look for some kind of short?

Also like I mentioned before, When the fuse is not broken and the dome light works, the parking lights do NOT. But when the fuse breaks and the Dome light does NOT work, the parking lights do. Is there a connection between these 2 things?

THANKS!!!!!!!!!!!!!
 
When the fuse is not broken and the dome light works, the parking lights do NOT. But when the fuse breaks and the Dome light does NOT work, the parking lights do. Is there a connection between these 2 things?

JTW, you might want to try the electrical forum for this one.

Ray
 
Thanks Raycow, I asked on the other forum and got many responses...although I have not fixed the problem.

On another note, and I will try to post in another thread perhaps, My car is in a garage getting restored and ALLLLLLL new sheet metal. All the fiberglass patching that I did is getting taken off and replaced with sheet metal. Part of this restoration is taking out the engine to degrease and paint Buick green and paint the entire firewall as it should.

While having the engine out, I am asking all of you if you can please share with me which areas I should look for any gremlins or parts that I should replace or repair while the engine is OUT!!! Freeze plugs perhaps and maybe some gaskets here and there? Thinking of buying an engine gasket set and replacing everything around water pump/manifold, timing chain, new timing chain, valve covers ETC...

If anyone has any advice that they can share with me as to replace somethings that might need replacing in the near future that I can attend to right now, I would appreciate it. I want my engine to be mechanically sound and look like a green gem once that hood is popped and be proud of my nailhead!!!!!!

...By the way, was told it's much much easier to pull tranny out with engine so tranny coming out too!!! (Anyone know the original color)....ALSO...entire driveline and differential coming out too!!! Gotta fix and NEED to fix all typical leaks along that darn torque tube and diff. Also gonna grind and clean the entire undercariage and apply some black undercoat.

I CAN'T WAIT TO GIVE MY BUICK THE TREATMENT!!!!!!!!!!!!!

Thanks in advance.
 
You might want to add the rear main bearing seal and the transmission front and rear seals to your list. If any of these ever need service, it is much easier to separate the engine and transmission while they are out of the car.

You could also give the distributor a going-over. This too is easier with the engine out of the car. Look for looseness or wear in the advance mechanism, shaft and bushings.

Ray
 
Thanks Ray,

I will change out those seals for sure.

The distributor was taken out when I got the carb rebuilt to be set at exact timing. New advance, new points, new rotor, new cap, new condenser.
 
idler arm power steering

Hello,
I'm adding power steering to my manual 60 lesabre and I'm wondering if I will need a different idler arm.
I already have the pump, brackets, bolts, hoses, rag joint, gear box, and 2 double groove pulleys.

Can I just use the idler arm that is on my manual steering? Hope so.
 
Back
Top