Search results

8.2 10 bolt B.O.P 293. Threads are 7/16. Not 3/8.

I returned the gears to JD Race and he refunded my money except the shipping. Totally fair I suppose but the carrier was not correct. I had two different people tell me it was a chevy carrier. I believe in the end he did end up finding the right carrier with 7/16 threads but I had already moved...

Quick Update: Contacted a rear end specialist and received a carrier with spider gears in it and a rebuild kit. Gave it to my builder and he stated it was a chevy carrier and not a BOP. Chevy screw holes were 3/8 and BOP are 7/16. My blown BOP was 7/16 so not a match. The rear end specialist...

BTW, I really appreciate all the help I receive on these forums. I attempted to replace the torsion rods myself but just got scared of the torque necessary to get them into place so I chose to take them to a body shop. Took them two attempts but it is right now. All information I received from...

Jim at JD Race hooked me up with a carrier and spider gears. Should be in the mail today or tomorrow. I sent him pics and he noticed another problem that I didn’t and set me up there too. He also didn’t gouge me on the price. Thanks all for your input. It is a struggle for me to keep this car...

Called JD Race and working with him. OLDFONEGUY. I had a so called professional work on my car and he failed to tighten up the ujoint bolts Aafter fixing a rear main seal. I travelled about 100 miles when I was going up hill, heard several clanks that I thought were coming from my brakes and...

Thanks larry. Jd race is on my list to call tomorrow.

Yes I found those but it specifically states”not for a B.O.P. Summit and JEGS have nothing That I could find.

Hi Bob, That is a $400 to $800 option. I did find a Yukon unit that with bearings and seals would be around $600. This is my last resort if I can’t find the spider gears. I don’t race the car and won’t know the difference between an OPEN diff vs. a POSI. If you are referring to just the POSI...

I blew the spider gears on my 293 10 bolt, 28 spline rear. I cant find replacement spider gears. Can anyone help.

Did you figure out your issue?

UPDATE. Went back to the shop and they corrected the problem. Seems the trunk hinge was hitting on the torsion rod on the left side. Now, on to the next issue.

I am finally ready to fix my 293 rear end diff and am trying to remember some info because it has been about 10 years since it broke. I have been running a skylark rear but I want to get the original rear back in. My ring gear has a number printed on it, 1382267 41 14 GMC. I can’t find this part...

Yes I have cleaned it, ran the car and turned the steering wheel (wife in the car) while I was under searching for the leak. Seems like when the car sits after driving, it leaks at some point through the night. I seem to be adding 3 to 4 oz of fluid every 50 miles. I am sure it is not leaking...

At least I think the leak is from the gearbox. Can I use a dye in the PS Reservoir to determine where the leak is? Don’t want to mess anything up with the dye. Also, a friend mentioned I should just replace it. Thoughts on a rockauto rebuilt replacement. Thanks

Update. Got the rods installed by a body shop for $50. The problem is now the left upper corner of the deck lid is out of alignment in that it sits higher. Any thoughts?

Thanks Bob I appreciate the input which is exactly what I am requesting. I only recently got my mpg up to 13 per gallon from 8 mpg by replacing a holley carb with a quadrajet. I could never get that holley tuned right. If you are right about a 20% gain in efficiency, and I think you are, I...

Don’t shoot me for moving off original. Just trying to get some info for adding something like a Holley Sniper EFI to my 67 GS 400. I believe the car will run better and have better gas milage. I drive my car around 1000 per year. My questions are 1- has anyone run into problems adding...

I have a 20 year old vinyl convt top where a flap has separated from the underside of the top above the plastic window. I have tried 3m adhesive but no luck. This was the contact spray. I am worried about trying other things so am asking for ideas. Whatever I try it can’t bleed through the...

My car is always garaged with a dust cover that works. I find that I will need to store my car outside for awhile and really need a recommendation on a 100% waterproof car cover. Once I finish with this usage I will use the cover on a different car so I would like a cover that can handle snow...