Search results

Anyone know a replacement part number for a 1966 buick riviera or where I can get them?

Can I find one cheaper than this?

Where is the temperature controller located?

1966 Buick Riviera. I can pull the hose off of the vacuum accumulator and plug it. Then the air works on defrost put it back on then it switch back to vent air.

What makes the temperature control switch from defrost to vent air? The reason why I'm asking is that the only way I can get mine to switch to defrost is to pull the vacuum line off of Vacuum Actuator under the dash. How can I remedy this?

Have anyone ever installed a disc brake kit for a 1966 Buick Riviera. I'm in the process now installing the Performance On-Line kit but running into a problem with my brake booster. It doesn't match up with the factory mount and the pushrod is too long. Is there an alternative booster that I can...

Do you think that you could find out the size and the spline of the rag joint?

Oil change, filter yes, greased suspension no. I don't drive it like that. I basically just start it up and let it run for a while.

I have all ready had the front suspension kit installed 10 years ago but I don't think they greased the upper and lower ball joints. Just had those replaced yesterday and also the idler arm but the center link no and how much for a rag joint complete not the kit?

Just left from talking to the mechanic he showed me where the centerlink on the pitman's arm had a lot play in it. Is there anyway to replace that grommet in the centerlink?

I'll try to send them some other way.

Here are the rag joint pictures.

Thank fellas, I am going to try the rag joint.

I was going to get my tires aligned they said that they couldn't do it because I needed upper and lower ball joints and he drove the car and noticed the steering was loose and when you hit a bump in the street the steering wheel moves everywhere. A lot of play in the steering wheel hard to drive...

Located in suspensions and steering.

I posted a pick of it in another thread asking if anyone knew rather or not if the pitman arm has the right part number. Check it out.

Anyone know the original part number to a 1966 brick Riviera pitman arm. Mine is straight no bend 7"and has this number 5697250-1340 is it correct?

Coming off The steering box it's straight no bend.