Search results

  1. A

    Front disk kit (with booster, dual master cylinder, proportioning valve) for 1966 B/C/E Body Buick (Wildcat, Electra, Riviera)?

    2001 astro...front power disc drum rears. If you ever drive one you will reconsider your response
  2. A

    Front disk kit (with booster, dual master cylinder, proportioning valve) for 1966 B/C/E Body Buick (Wildcat, Electra, Riviera)?

    Drive a 1999 -2005 Chevy Astrovan at 60mph and the engine quits.......steering in near impossible and with hydro boost power brakes well there is virtually none. Your emergency brake is all you have. I own an Astrovan and a 67 Wildcat without power brakes. ....in a given situation with the...
  3. A

    1951 BUICK Super Radio needs a rebuild!

    It depends on what's humming.... The orginal post is somewhat vague...I was just trying to point him in the direction he wanted to go. I would check some voltages before making any decisions. The radio has 2 6v6 outputs capable of 8-10 watts. The schematic that I think is in the service manual...
  4. A

    1951 BUICK Super Radio needs a rebuild!

    You can try taking yours apart ant clean the contacts....spring tension may be an issue. If it's been sitting a long time that may be the issue. I haven't checked these guys out but it may be worth a try. Match yours either by part number or by pin config......good luck...Dave...
  5. A

    1951 BUICK Super Radio needs a rebuild!

    The vibrator may have gone out..This is a vacuum tube radio that requires about 300v dc to function. The vibrator plugs in like a tube. It's a silver metal cylinder. The normal operation is that when you first turn the radio on the vibrator hums at a medium pitch. As the tubes warm up and they...
  6. A

    Up and over Bars Install

    Look on top of the ball....does it say Erie Car Guard? My 52 Super has a set installed....let me know
  7. A

    Punt,Pass or Kick ?

    What car are were talking about?
  8. A

    1952 buick frame

    I am measuring my frame and the frame dimensions in the factory manual has some discrepancies. Are the any other drawings with dimensions out there?
  9. A

    1952 frame identification

    Hi Group, I am brand new so please excuse my mistakes. I have just bought a frame/suspension for a1952 Super. How can I confirm this is the correct frame? I am planning on a frame up restoration on my dad's 1952 4dr Riviera sedan. Any info as to vin location on frame, frame interchange, etc...
Back
Top