The heat riser on my 66 skylark with the 300ci engine is locked up in the open position. I have soaked it with PB blaster with no change. Is it worth the trouble to go further or leave it alone as it is open. What it your opinion? The car is only driven in the summer.
I am replacing the transmission in my 66 skylark with a 350 turbo. Do i use the same switch pitch flywheel or do I need to get one for the 350?
Thanks Harley
I just got my 66 skylark front bumper back from being chrome plated. The back side is bare metal. What would be the best thing to use to keep it from rusting on the back side? paint, undercoating? :confused: Thanks
I am having a problem with no spark from the coil on my 66 300 engine.
I have replaced the engine wire harness with a new one from american wire for this unit. The car cranks, but will not fire. The engine is grounded. There is power to the positive side of the coil and the negitive side makes...
Does anyone know who makes a rubber seal for an air condition heater box retainer. It goes on the end of the heater box at the kick panel and seals threw the sheet metal up to the evaporator box. It also cushions the heater box in the retainer bracket. Its for a 66 skylark or any A body. I...
I have a 1966 right hand backup lamp that appears to be nos. It is similar to the one on a 66 skylark but not as tall
The lens part number is 5957497-2
The housing number is 5957497-1
I hope someone can tell me what it goes to. Thanks a lot
Does any one know how to remove a light socket from a 66 skylark back up light, so the housing can be rechromed without ruining the housing or socket ? Thanks for any help.