Dr. Frankenbuick's latest activity
-
DDr. Frankenbuick replied to the thread Interesting Buick Muscle Car Facts.There are some interesting facts about the full sized cars that were new to me. Thanks Sent from my iPhone using Tapatalk
-
DWell the Super Wildcat is finally done....as done as I'm gonna get it. Here are some pics: Don't mind that ugly seam on top of the...
-
DHere's a little progress pic of the engine. The carbs are on with linkage and the hose to the vacuum advance. The distributor is...
-
DDr. Frankenbuick replied to the thread 1966 Wildcat in 1/25 scale.Hugh, I looked in the 66 Chassis Service Manual and they show a shifter adjustment procedure for the 46000 series (Wildcat) with a three...
-
DDr. Frankenbuick replied to the thread 1966 Wildcat in 1/25 scale.Hugh, I buy and restore forclosed houses as our sideline (one child just finished college and another will start in the fall). The...
-
DProgress......I left off where I cut the top of the core support/fan guard out of the Riviera body. Here's what I did next. The awful...
-
DGot the fuel tank back its 15 inches in diameter with two fillers. now working on the mounting brackets The drive line bracket is made...
-
DDr. Frankenbuick replied to the thread 1966 Wildcat in 1/25 scale.Hugh, I had my 66 GS Skylark convertible seats reupholstered in dove. These were Legendary covers and they are generally good at...
-
DDr. Frankenbuick replied to the thread 1967Buick GS 400.116 sedans, 373 hardtops and 9 convertibles.
-
DDr. Frankenbuick replied to the thread 66 Skylark.204" long, 75" wide and 54" tall.
-
DGot the shaft machined to make open drive line. Getting exhaust finished and a ladder bar made to hold the rear end in place and a...
-
DDr. Frankenbuick replied to the thread 1966 401 NAILHEAD VALVES SPRINGS HEIGHT.^ +1. I have two sets of Carmens heads that i can't say enough about (one was formerly a set of yours Ted). When I changed cams he...
-
-
DDr. Frankenbuick replied to the thread 1966 401 NAILHEAD VALVES SPRINGS HEIGHT.From the 66 Chassis Service Manual listed in the reference section of our site: 1.690" closed inner spring height and 1.600" closed...
-
DDr. Frankenbuick replied to the thread Possible Posi Problems?.Gary, it sound like the posi unit is not working correctly. If you lift the rear off the ground, the tires should spin in the same...
-
DDr. Frankenbuick replied to the thread Need suggestions on 430 rebuild kits..Eddie, We are glad to have you right here and will do our best to see you down the right path. Steve Sent from my iPhone using Tapatalk
