67 Buick lesabre custom convertable

[ChevyGuy20]

ok so iv looked forever and can find no website that will spell it out dumb for me to decode the vin and body tag number. please someone help me. and please let me know where to get this info from as my father and i collect buicks to restore them..

VIN: 454677H3190326

Body Tag:
06B
ST 67-45467 FL1 259529 Body
TR 427-A C-1 Paint
W 2CXR
4 F 5KY

And the block number is 3815215

I know what i was told about the car and what is on it now but want all of it confirmed as i restore it completely. thanks!

[kappa1961]

VIN: 454677H3190326

Body Tag:
06B BUILT THE SECOND (B) WEEK OF JUNE(6)
ST 67-45467 FL1 259529 Body
67=YEAR 1967 45467=MODEL FL=FLINT (H in the vin number)

TR 427-A C-1 Paint 427=SEAT COLOR (I know only 421= blu)
C = artick white body paint
1 = top color (I don't remember if black or white)

W 2CXR W= custom bright exterior moulding.......R= rear speaker radio
4 F 5KY 4F= remote mirror
5K= door guard moldings


That all that I know.

Paolo from ITALY.

[buickGS400]

New member, I have a 67 Buick GS400 Conv.,Firewall Plate numbers are:

67-44667 00005
TR 191 F1C Paint

1296 10-570

Cannot locate engine serial #, has N R 024 , RH side of block over exh. manifold, no #'s aft. Thanks

[bob k. mando]

you should really start a new thread for things like this. it's too easy to get overlooked if you try to piggyback onto an existing discussion.

67- = 1967
4 = Buick
46 = GS 400 ( and unlike some years, this code is specific to the GS in 1967 )
67 = Convertible

00005 = sequential body #, is this ALL of the body number? it looks to be the 5th Buick produced from this plant, very possibly the 1st GS off the line. what's your VIN? that should also be very low.


TR 191 = Blue vinyl interior

F1C Paint
F = Blue Mist Iridium
1 = Black? vert top
C = if the car is two tone, the 2nd tone would be Arctic White


N R = "NR" is the stamping for the GS 400ci engine.

024 = probably a date or shift code of some kind


looks like a very nice find.

[buickGS400]

Thanks Bob for your information on decoding. If it helps to figure this code out, the conv. top is white. Also there was originally a stripe on each side, which is now gone; what color is the stripe and does the trim code show this?

BTW, I cannot find a button anywhere for starting a New Thread; please help me on this because I am new here.

Thanks, Larry