Results 1 to 3 of 3

Thread: 1992 Buick Lesabre Crank sensor removal 3.8 engine

  1. Exclamation 1992 Buick Lesabre Crank sensor removal 3.8 engine

    Anyone ever run into a issue removing the bolt for the harmonic Balancer ? I am working on a 92 3.8 ltr engine an this ones bolt is in hell of tight I have used a 6 ft of rachet an pipe an all I ended up with is breaking tools anyone have a idea on getting it out ?

  2. I use a 1/2 drive inpact gun and air pressure of 175 lbs . be sure to use a inpact socket.
    When you get the bolt off you will need a special puller to remove the crank pulley . HTH
    John
    Guyopel
    The early bird gets the worm but the second mouse always gets the cheese.

  3. Got it out

    I got the bolt out had to use a long breaker bar an pipe seems the last guy put way too much torque on the bolt

Similar Threads

  1. 1961 Buick LeSabre window crank removal
    By andrewdee in forum Tools, Shops, and Garages
    Replies: 1
    Last Post: 06-27-2010, 09:49 PM
  2. 1992 Regal twilight sensor
    By my455skylark in forum 1980 and up
    Replies: 0
    Last Post: 05-06-2007, 12:24 PM
  3. Cam and crank sensor replacement
    By Lawrence Mackey in forum 1980 and up
    Replies: 8
    Last Post: 02-17-2006, 12:34 PM
  4. 89 Regal GS Wont start Crank Sensor?
    By coyster in forum 1980 and up
    Replies: 2
    Last Post: 02-12-2005, 08:32 PM
  5. Crank Position Sensor
    By shade tree mechanic in forum 1980 and up
    Replies: 0
    Last Post: 12-03-2003, 03:49 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •