10 / 10 / 09 Update on Toby
Posted 10-11-2009 at 02:33 AM by Jim Carmichael
The power steering pump was rebuilt using a kit purchased on EBay that included all the "O" rings and front seal along with a good set of instructions.
The kit did not include a new filter ring so the old one was carefully cleaned up and reused.
This is what the pump looks like after rebuilding.
This is how the pump looks when it is attached to the generator.
I also took time to install the restored carburetors on the Ford and they look very nice.
It was nice to find Holley had included a full set of the cork air filter gaskets that are unique to this induction set up.
The kit did not include a new filter ring so the old one was carefully cleaned up and reused.
This is what the pump looks like after rebuilding.
This is how the pump looks when it is attached to the generator.
I also took time to install the restored carburetors on the Ford and they look very nice.
It was nice to find Holley had included a full set of the cork air filter gaskets that are unique to this induction set up.
Total Comments 1
Comments
-
Jim you do some pretty work. I've been posting comments on the straight eight site for about 3yrs. but I just found this part of Team Buick.Posted 10-11-2009 at 09:45 AM by charley 
