Pushing to get her back on the road.
Posted 11-17-2007 at 02:20 AM by clownpuncher
I recently rebuilt the carb and fuel pump. Well my exhaust was rusted so I bought a complete unit on eBay, well I went little further and snapped a stud on the exhaust mainfold and that stopped everything. I'm able to get new studs but had to get the studs machined out. Now a freeze plug is leaking and the set I bought from Bob's Buick do not fit they are too large. I have to send them back and hunt for he correct set. Once this is done I need a new set of gaskets for the intake and exhaust, and I will be back on the road. The car ran good after the rebuild carb and fuel pump was done.
Total Comments 1
Comments
-
Good luck with the exhaust. I purchased 4 different manifolds for my 52 and finally bought a new old stock unit that solved my leak problem. The problem I had was all of the manifolds were warped in one direction or another.Posted 12-11-2007 at 11:14 PM by Jim Carmichael 
