replaced stop switch, bulbs, and fuse and checked wiring. still no brake lights. any suggestions? :wave:

Check and see if you have power to the switch. Run a jumper to the switch and if the brake lights work, you are not feedin the switch

smile.gif smile.gif smile.gif

Do the turn signals use the same bulb as the brakes? Do you have turn signals? I had a problem, on a different make, where after using the turn signal, one side of the brake lights wouldn't work. It turned out to be a worn turn signal switch.

Do the brakes themselves work? If not maybe you have low fluid.

Is the key on?

problem solved