I am currently restoring a '64 Buick Electra 225. It has a 401 bored .060
over with an aluminum dual quad intake with 2 Rochester quadrajet 4-bbl
carburetors. I have installed a direct-port nitrous injection system on the
underside of this manifold. I also built my own headers with
1.75" primaries into a 4" collector and I have 4" exhaust all the way out. I
have old pictures on my website (below) if you're interested, and I'm trying
to find time to update it.

Anyway, I am having trouble finding air cleaner(s) for this engine. My
carburetors have a neck size of 4.25" and a center to center dimension of
8.75". I was wondering if anyone knows of anywhere that I can buy (or at least
find information on) air cleaner(s) for this application. I have been looking
around and can't find anything for this neck size.

Thanks for your help on this.


Thanks,

Nick M. Rosenberry
nickrose@iastate.edu www.public.iastate.edu/~nickrose (http://www.public.iastate.edu/~nickrose)

Here's one for ya!
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=34202&item=2400146906

------------------
Hillbilly
67 Buick Electra Conv
70 GS Stage 1
73 Gran Sport Stage 1
ASE Certified Master Tech
GM Master Tech
Support this site, CLICK HERE! (http://www.amazon.com/paypage/PCRN533B587O2)

That linked ebay auction would not work on your aftermarket application. It's a stock 2x4 mfold setup with carter AFB's. Try this:
http://www.vintagespeed.com/

[This message has been edited by gungeey (edited 01-12-2003).]